Skip to content
  • HOME
  • ENVIRONMENTAL
    • SPILL KITS
    • ABSORBENTS
    • HAZMAT CONTAINERS
    • FLOOD PREVENTION
    • SPILL CONTAINMENT
    • STORM WATER MANAGEMENT
  • SAFETY (PPE)
    • GAS DETECTION
    • EAR PLUGS
    • GLOVES
  • CONTACT US
  • ABOUT US
  • LinkedIn
Welcome to Zona Supply
  • LinkedIn
ZonaSupply ZonaSupply
  • HOME
  • ENVIRONMENTAL
    • SPILL KITS
    • ABSORBENTS
    • HAZMAT CONTAINERS
    • FLOOD PREVENTION
    • SPILL CONTAINMENT
    • STORM WATER MANAGEMENT
  • SAFETY (PPE)
    • GAS DETECTION
    • EAR PLUGS
    • GLOVES
  • CONTACT US
  • ABOUT US
Search Cart
Quick view
EISEN TechniCut EW2322 Ultra Thin 21 Gauge Cut Level C Glove
Eisen-Proteq
from $2,120.40
Quick view
EISEN TechniTherm EW3480 NBX Coated Cut Level D Heat Resistant Glove
Eisen-Proteq
from $2,546.40
Quick view
EISEN TechniCut EW2680 NBX Coated Cut Level F Glove
Eisen-Proteq
from $2,494.80
Quick view
EISEN TechniCut EW2400 Ultra Thin 21 Gauge Cut Level D Glove Liner
Eisen-Proteq
from $2,065.20
EISEN TechniCut EW2322 Ultra Thin 21 Gauge Cut Level C Glove
Eisen-Proteq

EISEN TechniCut EW2322 Ultra Thin 21 Gauge Cut Level C Glove

SKU: EW2322 $18.95/pair

Regular price $2,274.00
/

FOR MIX/MATCH CASES PLEASE SUBMIT YOUR QUANTITIES BELOW IN THE "ASK A QUESTION" BOX. BE SURE TO SUBMIT SIZES IN QUANTITY'S OF 10 TO EQUAL 120 PAIRS PER CASE.

The thinnest cut level C glove available, offering the highest possible dexterity from a unique 21 gauge liner. Superlative tactility, comfort and flexibility from the only glove of its type on the market.

EISEN Safety Indicator 

Glove wearers frequently struggle to understand what level of protection their glove provides, especially in relation to the full spectrum of a particular protection range e.g. 1-5, A-F. This can result in increased injuries from poor glove selection – possibly chosen for dexterity or comfort rather than offering sufficient protection. The intuitive patent-pending EISEN Safety Indicator allows the wearer to easily identify the glove’s protective performance in both visual and written forms, unlike other identification systems which do not indicate the spectrum of protection available.

Liner

The unique 21 gauge liner composition is the secret of the TechniCut EW2322 phenomenal dexterity, which compares favourably with a standard nylon glove. Using a special combination of Tungsten and the best Tsunooga high strength and high modulus UHMWPE super fibres, the EISEN TechniCut EW2322 is constructed around an ultra-thin cut-resistant knitted liner that offers an excellent level of cut resistance to level C. Anatomically designed to follow the morphology of the hand, dexterity is maximised and fatigue reduced to an absolute minimum. The UHMWPE super fibre is combined with polyamide and Spandex to provide a winning combination of comfort and protection.

21 Gauge Knitting Technology 

Mastering this unique knitting process has enabled EISEN to produce the finest knitted protective gloves available. Unparalleled dexterity. Maximum tactility.

 Coating

Using a premium quality polyurethane coating, the TechniCut EW2322 offers excellent performance:

• Highly breathable for improved climate control

• Silicone-free to eliminate contamination and fingerprints

• Uniquely comfortable with highly flexible - yet secure - grip

• Reinforced thumb crotch for increased abrasion resistance

EISEN TechniTherm EW3480 NBX Coated Cut Level D Heat Resistant Glove
Eisen-Proteq

EISEN TechniTherm EW3480 NBX Coated Cut Level D Heat Resistant Glove

SKU: EW3480 $22.75/pair

Regular price $2,730.00
/

FOR MIX/MATCH CASES PLEASE SUBMIT YOUR QUANTITIES BELOW IN THE "ASK A QUESTION" BOX. BE SURE TO SUBMIT SIZES IN QUANTITY'S OF 10 TO EQUAL 120 PAIRS PER CASE.

High precision cut level D silicone free glove offering heat resistance to 100°C and over 200% higher abrasion resistance combined with outstanding grip and dexterity

 

EISEN Safety Indicator

Glove wearers frequently struggle to understand what level of protection their glove provides, especially in relation to the full spectrum of a particular protection range e.g. 1-5, A-F. This can result in increased injuries from poor glove selection – possibly chosen for dexterity or comfort rather than offering sufficient protection. The intuitive patent-pending EISEN Safety Indicator allows the wearer to easily identify the glove’s protective performance in both visual and written forms, unlike other identification systems which do not indicate the spectrum of protection available.

 

Liner

Using a unique combination of Kevlar, stainless steel, nylon and Spandex, the EISEN TechniTherm EW3480 is constructed around a soft, thin high cut resistance knitted liner that offers excellent cut resistance to level D. Anatomically designed to follow the morphology of the hand, dexterity is maximised and fatigue reduced. The Kevlar and stainless steel combination provide an unparalleled combination of high dexterity, heat resistance, comfort and cut protection.

 

Coating

Using the EISEN NBX ultra-high performance coating, the TechniTherm EW3480 offers outstanding protective characteristics:

• Exceptional abrasion resistance at three times the maximum abrasion test threshold for enhanced durability

• Great grip using a super smooth foam surface for a suction effect

• Highly breathable for improved climate control

• Kind to your skin with no DMF or solvents

• Silicone-free to eliminate contamination and fingerprints

• Uniquely comfortable with highly flexible and cushioned grip

EISEN TechniCut EW2680 NBX Coated Cut Level F Glove
Eisen-Proteq

EISEN TechniCut EW2680 NBX Coated Cut Level F Glove

SKU: EW2680 $22.34/pair

Regular price $2,680.80
/

FOR MIX/MATCH CASES PLEASE SUBMIT YOUR QUANTITIES BELOW IN THE "ASK A QUESTION" BOX. BE SURE TO SUBMIT SIZES IN QUANTITY'S OF 10 TO EQUAL 120 PAIRS PER CASE.

Precision cut level F silicone free glove offering extreme cut resistance and over 300% higher abrasion resistance with outstanding grip and good dexterity

 

EISEN Safety Indicator 

Glove wearers frequently struggle to understand what level of protection their glove provides, especially in relation to the full spectrum of a particular protection range e.g. 1-5, A-F. This can result in increased injuries from poor glove selection – possibly chosen for dexterity or comfort rather than offering sufficient protection. The intuitive EISEN Safety Indicator allows the wearer to easily identify the glove’s protective performance in both visual and written forms unlike other identification systems which do not indicate the spectrum of protection available.

 

Liner

Using a special combination of Tungsten and the best Tsunooga high strength and high modulus UHMWPE super fibres, the EISEN TechniCut EW2680 is constructed around a soft, ultra-high cut resistance knitted liner that offers the highest level of cut resistance to level F. Anatomically designed to follow the morphology of the hand, dexterity is maximised and fatigue minimised. The UHMWPE super fibre is combined with polyester, polyamide and spandex to provide a winning combination of comfort and protection using a special knitting technique to enhance moisture management and flexibility.

 

Coating

Using the EISEN NBX ultra-high performance coating, the TechniCut EW2680 offers outstanding protective characteristics:

• Exceptional abrasion resistance at three times the maximum abrasion test threshold for enhanced durability

• Great grip using a super smooth foam surface for a suction effect

• Highly breathable for improved climate control

• Kind to your skin with no DMF or solvents

• Silicone-free to eliminate contamination and fingerprints

• Uniquely comfortable with highly flexible and cushioned grip

• Reinforced thumb crotch for increased abrasion resistance

EISEN TechniCut EW2400 Ultra Thin 21 Gauge Cut Level D Glove Liner
Eisen-Proteq

EISEN TechniCut EW2400 Ultra Thin 21 Gauge Cut Level D Glove Liner

SKU: EW2400 $18.45/pair

Regular price $2,214.00
/

FOR MIX/MATCH CASES PLEASE SUBMIT YOUR QUANTITIES BELOW IN THE "ASK A QUESTION" BOX. BE SURE TO SUBMIT SIZES IN QUANTITY'S OF 10 TO EQUAL 120 PAIRS PER CASE.

The thinnest cut level D glove available, offering the highest possible dexterity from a unique 21 gauge liner. Superlative tactility, comfort and flexibility from the only glove of its type on the market. Ideal as a glove liner for disposable or chemical hand protection.

 

EISEN Safety Indicator 

Glove wearers frequently struggle to understand what level of protection their glove provides, especially in relation to the full spectrum of a particular protection range e.g. 1-5, A-F. This can result in increased injuries from poor glove selection – possibly chosen for dexterity or comfort rather than offering sufficient protection. The intuitive patent-pending EISEN Safety Indicator allows the wearer to easily identify the glove’s protective performance in both visual and written forms, unlike other identification systems which do not indicate the spectrum of protection available.

 

Liner

The unique 21 gauge liner composition is the secret of the TechniCut EW2400 ’s phenomenal dexterity, which compares favourably with a standard nylon glove. Using a special combination of Tungsten and the best Tsunooga high strength and high modulus UHMWPE super fibres, the EISEN TechniCut EW2400 is constructed around a ultra thin cut resistant knitted liner that offers an excellent level of cut resistance to level D. Anatomically designed to follow the morphology of the hand, dexterity is maximised and fatigue reduced to an absolute minimum. The UHMWPE super fibre is combined with polyamide and Spandex to provide a winning combination of comfort and protection.

 

21 Gauge Knitting Technology 

Mastering this unique knitting process has enabled EISEN to produce the finest knitted protective gloves available. Unparalleled dexterity. Maximum tactility

© 2023 ZonaSupply

Powered by Shopify